Rear Brake Disc Rotor for Aprilia Pegaso 650 IE 2001-2004 / Pegaso 650 Trail 2005-2008 / Husqvarna TR650 Strada / Terra 2013-2014

• Fit for:
  Aprilia Pegaso I.E. 650CC Rear 2001-2004;
  Aprilia Pegaso TRAIL 650CC Rear 2005-2008;
  Benelli TNT RS 1130 2005-2007;
  Benelli TNT 1130 Sport 2004-2009;
  Benelli TNT 1130 Sport Evo 2004-2009;
  Benelli Tornado TRE 1130 2006-2010;
  Benelli Tornado TRE 1130 Naked 2006-2010;
  Benelli Tornado TRE 1130 Naked Sport 2006-2007;
  Benelli Tornado TRE 1130 Naked Sport Evo 2007-2008;
  Benelli BN 302 300CC 2015-2018;
  Benelli BN 600 600CC 2015-2017;
  Benelli BN 600 GT 600CC 2015-2017;
  Benelli TNT 899CC 2008-2016;
  Benelli TNT S 899CC 2008-2011;
  Benelli TNT 1130CC 2004-2006;
  Benelli TORNADO NAKED TRE R 1130CC 2016;
  BMW F 650 1993-2003/metal 1993-2000;
  BMW F 650 CS 2000-2005;
  BMW F 650 GS ABS 1999-2007;
  BMW F 650 CS Scarver 650CC K14 e1*00130 2000-2003/K14 E650C e1*0201 2003-2005;
  BMW F 650 GS 650CC single Cylinder e1*00061 R13 Rear 1999-2007;
  BMW F 650 GS DAKAR 650CC Rear 1999-2007;
  BMW F 650 ST Strada E169 G532 BMW169 1997-2001;
  BMW G 650 GS Cast Wheel R131 e1*0200 E650G 2009-2016;
  BMW G 650 GS Spoke Wheel R131 e1*0200 E650G 2009-2014;
  BMW G 650 GS Sertao R134 e1*0200 E650G 2012-2014;
  BMW G 650 Xmoto K15 E65X ABE/EG 2006-2009;
  KTM 690 Supermoto 2007-2010;
  KTM 690cc 690 Enduro (ABS) 2008-2010;
  KTM 690cc 690 Enduro (ABS) 2011-2013;
  KTM 690cc 690 Enduro (non-ABS) 2008-2010;
  KTM 690cc 690 Enduro (non-ABS) 2011-2013;
  KTM 690cc 690 Enduro R (non-ABS) 2009-2013;
  KTM 690cc 690 SMC 2008-2011;
  KTM 690cc 690 SMC R (non-ABS) 2012-2013;
  KTM 690cc 690 Supermoto R 2008-2010;
  KTM 950cc 950 Adventure 2003-2006;
  KTM 950cc 950 Super Enduro R 2007-2008;
  KTM 990cc 990 Adventure, R, Dakar non-ABS 2006-2013;
  Husqvarna TR 650 STRADA 650 2013-2014;
  Husqvarna TR 650 TERRA 650 2013-2014.
• 420 stainless steel, heat treated to ensure warp resistance.
  
• Discs can stay cool is by adding slots or grooves to the disc. These slots also provide an escape route for heat, gas and waste material, preventing it from building up on the contact surfaces.
  
• Wave design allows for better heat dissipation and water dispersion, the venting slots are designed to reduce the brake surface temperature and make the dirt and water are dispersed quickly.
• Directly bolt on, no additional hardware necessary.
• We marked the Min Thickness on the surface ,it means you should replace the brake disc rotor when the thickness with Minimum Thickness to ensure save ridding

Rear Brake Disc
Outer Diameter : 240mm
Inner Diameter: 110mm
Thickness: 5mm
Hole Quantity: 6
Hole Size : 6.4mm
Hole Spacing : 124mm